Techniques

How to blend colored pencils smoothly

Updated November 21, 2026 · About 12 minutes to read

As an Amazon Associate I earn from qualifying purchases.

We earn a commission if you buy through the links marked “paid link” on this site. It doesn’t change what we recommend. Prices and availability are set by Amazon and change often.

What “smooth” actually means

A smooth blend is the result of light layers, controlled pressure, and a last step that fills the tiny white flecks of the paper. This guide is for adults who color or draw with wax- or oil-based pencils. It will not make anyone fluent in a weekend, and it does not replace a few minutes of practice on scrap paper.

When a blend looks rough, you are usually seeing a hard edge where one color stops, or the paper’s tooth still showing as white speckles. Both are normal in early layers. You fill the tooth gradually, walk the two colors into each other, and only then — when the area is almost finished — burnish or use a blender. If you press hard on the first pass, you seal the surface, and later color has nowhere to go.

What you need

You can practice this on almost any set you already own. Soft, wax-based artist pencils lay down a lot of color with little pressure and are the kind most often used for creamy blends. On this site we use the Prismacolor Premier Soft Core set of 24 as the example, because we have already researched that listing. A firmer, oil-based pencil such as the Faber-Castell Polychromos tin of 24 holds a point longer and is less prone to wax bloom, but it may take more layers to look fully filled. Either type will work if you stay light at the start. A larger soft-core set, such as the Castle Art Supplies 72 for adults, is useful only if you already have it; you do not need 72 colors to learn the motion.

Paper matters as much as the pencil. A pad made for colored pencil, such as the Strathmore 400 Series 9 × 12 inch pad, gives you more room to layer before the surface stops taking color. If a coloring-book page is thin, practice on scrap first and skip solvent.

A long-point sharpener helps with soft cores, which break easily in a dull sharpener. A colorless blender pencil and a small bottle of odorless mineral spirits are extras, not requirements. Pencils alone can still give a smooth result.

A short pressure exercise

Before you touch the drawing, shade a strip from the lightest mark you can leave to a heavy, shiny pass, using a light color and a dark one. Almost all of your layers should live in the light-to-medium part of that scale. The heavy end is for burnishing at the end, not for the first fill.

Step by step, on a petal, a leaf, or any simple shape

Finish a small, complete shape — a single petal is enough — rather than chasing a whole bouquet at once.

  1. Map the lights and darks with almost no pressure. Outline the shape lightly, or work inside a printed line. Put a whisper of your lightest local color over the whole area, leaving the highlight a little cleaner if there is one. You should still see plenty of paper.
  2. Build midtones in small, overlapping strokes. Use tiny circles or short strokes that follow the form — along the curve of a petal, not across it. Keep the pressure light. Two or three passes of the same color are better than one heavy one. Turn the pencil as you work so the point wears evenly.
  3. Walk neighboring colors into each other. Where a pink turns toward a deeper rose, or a leaf turns from yellow-green to blue-green, overlap the two colors in the middle instead of butting them up against a hard line. Go back with the lighter of the two to soften the join. This pencil-only blend is the safest method and works on any paper.
  4. Deepen the shadows with color, not just black. A dark violet, indigo, or brown usually makes a more natural shadow than a straight black. Add it in thin layers. If you go too dark, a precision eraser can lift a little; it is much harder to lift a heavy black pass.
  5. Decide how you will finish the surface. From mildest to strongest: another light pass of the lighter pencil over the join, stopping while the paper still has a little tooth; a colorless blender (binder, no pigment) with medium pressure near the end, which evens the surface and begins to seal it; or burnishing — heavy pressure on purpose, as a final pass, with a light color, the same color, or the blender. Burnishing flattens the tooth and looks slightly shiny. Plan it last, and work from light toward dark so you do not drag dark pigment into a highlight.
  6. Use a solvent only if you mean to, and only on heavy paper. A very small amount of odorless mineral spirits, such as Gamblin Gamsol, applied with a brush or a cotton swab, dissolves the binder so wax-based layers flow together. Let it dry completely before you add more pencil. If you do not have solvent at home, or you are working in a thin, double-sided coloring book, skip it. Pencil, blender, and burnishing are enough. Read the safety notes below before you open a bottle.

Common mistakes

Safety notes for solvents

Work in a ventilated room. Use the smallest amount that does the job. Cap the bottle when you are not using it. Keep it away from heat and open flame. Read and follow the safety information on the product label. Never pour solvent into an unlabeled container, and do not use it around children or pets. “Odorless” does not mean harmless. If you cannot ventilate the room, stay with dry blending.

Watch the video

This written guide is the companion to our video on how to blend colored pencils smoothly. When that video is published, it will be embedded here. We will not add a link or a player until the video exists.

No video is available yet.

Questions

Can I blend without a blender pencil or solvent?

Yes. Layering two colors into each other and finishing with the lighter pencil is enough. A blender or solvent is a convenience, not a requirement.

Will this work in an adult coloring book?

Often, yes, if the paper can take several layers. If the page is thin or printed on both sides, stay with light layers and a colorless blender, skip solvent, and put a spare sheet behind the page.

How do I avoid wax bloom?

Wax bloom is a hazy film that can appear on heavy wax layers, especially dark ones. It is not dirt. A gentle wipe with a soft tissue removes it for a while; a spray fixative made for drawings can help it return more slowly. Oil-based pencils are less prone to it.

Which pencil should I start with if I am buying a set?

If you want a soft, creamy core, the Premier 24 is the set we already describe in our choosing guide. If you prefer a firmer point and published lightfastness ratings, look at the Polychromos tin of 24. Buy the set you will actually use.

Tools mentioned in this guide

These are the listings we already researched for The Coloring Desk. None of them is required for the first five steps. There are no prices on this page; Amazon sets price and availability, and both change.

As an Amazon Associate I earn from qualifying purchases.

We earn a commission if you buy through the links marked “paid link” on this site. It doesn’t change what we recommend. Prices and availability are set by Amazon and change often.

Prismacolor Premier Soft Core, 24 colors

Listing title: Prismacolor Premier Colored Pencils, Soft Core, Assorted Colors, 24 Count · ASIN B00006IEEU

An artist-grade, wax-based pencil known for a very soft, creamy core. The listing describes it as made for blending, shading, and layering. Soft cores lay down a lot of color with little pressure but wear down faster and can snap if dropped.

Good for
Rich, saturated color and smooth blends; adults who color large areas and like a painterly finish.
Skip if
You press hard, sharpen to needle points for fine detail, or dislike wax bloom (a hazy film that can appear on heavy wax layers).

See the current price on Amazon

Faber-Castell Polychromos, tin of 24

Listing title: Faber-Castell Polychromos Artists' Color Pencils - Tin of 24 Colors - Premium Quality Artist Pencils · ASIN B0007OECK8

An oil-based, artist-grade pencil. The listing describes break-resistant leads (SV bonding) that are water-resistant and smudge-proof, and Faber-Castell’s own product page gives the lead as 3.8 mm thick. Faber-Castell publishes a lightfastness rating for Polychromos colors. Oil-based cores feel firmer than soft wax cores and hold a point well.

Good for
Many thin layers, crisp detail, and work you want to keep; anyone bothered by wax bloom.
Skip if
Your priority is a large color range for the money. This is a premium set, and 24 colors is a starting palette.

See the current price on Amazon

Strathmore 400 Series Colored Pencil pad, 9 × 12 in

Listing title: Strathmore 400 Series Wire Bound Colored Pencil Pad, 100 lb. Paper, 9 X 12 inches, 30 Sheets (477-9) · ASIN B00UJXIY9W

A wire-bound pad made specifically for colored pencil: 100 lb paper and 30 sheets, according to the listing. A paper designed for the medium is the easiest way to get more layers before the surface stops taking color.

Good for
Practice swatches, technique exercises, and your own drawings.
Skip if
You only color in printed books.

See the current price on Amazon

KUM Long Point sharpener

Listing title: KUM Long Point Pencil Sharpener with Lead Pointer · ASIN B0084F7I1C

A hand sharpener with two holes: the first cuts back the wood, the second shapes a long point on the core. A long, gradual point is less likely to snap and is useful for fine detail.

Good for
Soft and artist-grade pencils that break in ordinary sharpeners.
Skip if
You prefer a desk or electric sharpener, or rarely need a fine point.

See the current price on Amazon

Tombow Mono Zero eraser, round 2.3 mm

Listing title: Tombow Mono Zero Eraser, Round 2.3mm · ASIN B00HE6D70S

A refillable, pen-style precision eraser with a narrow round tip, so you can lift color in small areas or add highlights without disturbing the rest of the page.

Good for
Lifting small highlights, cleaning edges, and correcting detail.
Skip if
You need to erase large areas; a standard block eraser is better for that.

See the current price on Amazon

Prismacolor Premier Colorless Blender, 2 pencils

Listing title: Prismacolor 962 Premier Colorless Blender Pencils, 2-Count · ASIN B0933GT2M7

A pencil with binder but no pigment. Used on top of existing layers, it pushes color into the paper’s texture and softens transitions without adding a new hue.

Good for
Smoothing gradients and burnishing light areas without darkening them.
Skip if
You prefer a solvent blend, or your paper is already almost full of layers.

See the current price on Amazon

Gamblin Gamsol odorless mineral spirits, 4.2 oz

Listing title: Gamblin Gamsol Odorless Mineral Spirits Bottle, 4.2oz · ASIN B00IIWQFO2

A low-odor solvent sold for oil painting. Some colored pencil artists apply a very small amount with a brush or cotton swab to dissolve the binder and blend layers smoothly. The listing describes it as a petroleum distillate.

Good for
Large, smooth backgrounds and skies on heavyweight paper.
Skip if
You color in thin, double-sided coloring books, or you cannot work in a ventilated room. Read the safety notes above first.

See the current price on Amazon

Related guides

For a shorter overview of the same three techniques, see layering, blending, and burnishing. For help choosing a set, see how to choose colored pencils.